When a car stops in the middle of a busy Melbourne road, most people only think about getting off the lane as quickly as possible. Very few stop to consider whatWhen a car stops in the middle of a busy Melbourne road, most people only think about getting off the lane as quickly as possible. Very few stop to consider what

Understanding Different Types of Tow Trucks: Which One Do You Need

2025/12/12 18:48

When a car stops in the middle of a busy Melbourne road, most people only think about getting off the lane as quickly as possible. Very few stop to consider what kind of tow truck Melbourne is on the way. Yet the type of truck that arrives can change how safe the job is, how much your vehicle is stressed and how long it takes before you are back on the move. Choosing the right setup is not only the work of the towing company. It also helps if drivers understand the basic differences.

Main types of tow trucks and how they work

Tilt tray and flat bed trucks

Many people picture a truck with a long steel tray that tilts down to the road. The car is pulled up onto the tray with a winch, and then the tray levels again. This method keeps all four wheels off the ground. It is gentle on the drive line and suits All Wheel Drive cars, prestige models and heavily damaged vehicles.

Tilt tray trucks are also ideal when a car has locked wheels or severe front-end damage. Rather than dragging the vehicle, the operator can slowly load it onto the tray and secure it with straps and chains. This gives better control on freeways and over longer distances.

Wheel lift trucks

Wheel lift trucks use a metal cradle that slides under the front or rear wheels. The cradle lifts that end of the vehicle while the other two wheels stay on the road. This style of towing is fast to set up and works well for short jobs, such as moving a car from a clearway zone or shifting an abandoned vehicle from a private driveway.

Because two wheels remain on the ground, wheel lift towing suits many standard passenger cars, but it is not ideal for severely damaged or very low vehicles. It is better used when the car still rolls freely, and the main challenge is access or time pressure.

Heavy-duty recovery trucks

For trucks, buses, motorhomes and loaded commercial vans, a standard tow truck is often not enough. Heavy-duty recovery trucks come with larger booms, stronger winches and reinforced chassis. They can lift and stabilise long wheelbase vehicles and manage the weight that would overwhelm a light towing setup.

These trucks are used on highways, industrial estates and construction sites where a breakdown can stop more than one vehicle and delay many people. Matching a heavy vehicle with the right recovery truck protects both the asset and the road surface.

Special towing for tight and underground spaces

In busy parts of Melbourne, many breakdowns happen in basements and tight car parks. Low ceilings and tight ramps limit what can enter. Some operators use shorter trucks with lower overall height and tighter turning circles specifically for these spaces. They may combine careful winching with slow, controlled moves rather than quick, straight-line loading.

How to work out which tow truck you need

When you call a towing company, the questions they ask are not small talk. Each answer helps them decide which truck and which driver to send. You can prepare by thinking through a few points before you call.

First, describe the type of vehicle. A small hatchback, family sedan, work ute, Four Wheel Drive or light truck each places different demands on the tow. Mention accessories such as roof racks, tool boxes or long ladders that may affect length and weight.

Second, explain the level of damage. Say clearly if the car still rolls, if any wheels are locked, if the steering turns and if there is fluid leaking onto the road. These details help the company decide whether a tilt tray is safer than a wheel lift.

Third, describe the location. Is the vehicle on a freeway shoulder, in a narrow lane, inside an underground car park or on a steep driveway? Access often matters more than distance. A company that focuses on car towing Melbourne day after day will listen for these clues and choose equipment that can actually reach you, not only tow you away.

Finally, talk about your next step. If the car is going to a local mechanic, a short tow may be enough. If you need to move it across the city to a dealer or panel shop, a tilt tray can reduce wear on tyres and drive line.

A reliable towing provider will guide you through these questions and recommend the safest and most efficient option. When the right truck arrives, loading is smoother, the scene clears faster, and you feel more confident that your vehicle is in good hands, even on a stressful day on Melbourne roads.

Comments
Disclaimer: The articles reposted on this site are sourced from public platforms and are provided for informational purposes only. They do not necessarily reflect the views of MEXC. All rights remain with the original authors. If you believe any content infringes on third-party rights, please contact service@support.mexc.com for removal. MEXC makes no guarantees regarding the accuracy, completeness, or timeliness of the content and is not responsible for any actions taken based on the information provided. The content does not constitute financial, legal, or other professional advice, nor should it be considered a recommendation or endorsement by MEXC.

You May Also Like

Big U.S. banks cut prime rate to 7.25% after Fed’s interest rate cut

Big U.S. banks cut prime rate to 7.25% after Fed’s interest rate cut

The post Big U.S. banks cut prime rate to 7.25% after Fed’s interest rate cut appeared on BitcoinEthereumNews.com. Big U.S. banks have lowered their prime lending rate to 7.25%, down from 7.50%, after the Federal Reserve announced a 25 basis point rate cut on Wednesday, the first adjustment since December. The change directly affects consumer and business loans across the country. According to Reuters, JPMorgan Chase, Citigroup, Wells Fargo, and Bank of America all implemented the new rate immediately following the Fed’s announcement. The prime rate is what banks charge their most trusted borrowers, usually large companies. But it’s also the base for what everyone else pays; mortgages, small business loans, credit cards, and personal loans. With this cut, borrowing gets slightly cheaper across the board. Inflation still isn’t under control. It’s above the 2% goal, and the impact of President Donald Trump’s tariffs remains uncertain. Fed reacts to rising unemployment concerns Richard Flynn, managing director at Charles Schwab UK, said jobless claims are at their highest in almost four years, despite the Fed originally planning to keep rates unchanged through the summer. “Although the summer began with expectations of holding rates steady, the labor market has shown more signs of weakness than anticipated,” Flynn said. Hiring has slowed because of uncertainty around Trump’s trade policy. Companies are hesitating to add staff, which is why job growth has nearly stalled. As fewer people are hired, spending starts to shrink. And that’s when things start to unravel. That’s what the Fed is trying to get ahead of with this rate cut. The cut also helps banks directly. Lower rates mean more people may qualify for loans again. During the previous rate hikes, lending standards got tighter. Now, with cheaper credit, smaller businesses could get approved again. If well-funded businesses feel confident, they may hire again. That could eventually help the consumer side of the economy bounce back, but that’s…
Share
BitcoinEthereumNews2025/09/18 16:32